走刀式分板機有哪些使用方法
走刀式分板機有哪些使用方法：
What are the use methods of the knife type plate splitter
1、開機前確定電源電壓AC220V。
Confirm the power supply voltage AC220V before starting
2、打開設備電源開關ON的位置。
Turn on the device power switch on.
3、行程設定共有五個0、100、200、300、400根據要分的板材選擇合適的行程。
There are five stroke settings: 0, 100, 200, 300 and 400. Select the appropriate travel according to the plate to be divided.
4、根據板材的厚度來調整切刀的上下高度。根據速度選擇鍵：超快速、快速、中速、慢速四種來選擇設備的運行速度。
Adjust the height of the cutter according to the thickness of the plate. According to the speed selection key: ultra fast, fast, medium speed, slow four to select the running speed of the equipment.
5、調整平臺的高度，確保放置PCBA板時為水平放置。
Adjust the height of the platform to ensure that the PCBA board is placed horizontally.
6、分板時PCBA的邊緣凹槽要卡在分板機的下切刀位置，雙手扶穩PCBA，用腳輕踩踏板，直到切刀走到設定的距離自動停止。
When dividing the board, the edge groove of PCBA should be stuck in the position of the lower cutter of the dividing machine. Hold the PCBA with both hands, and step on the pedal gently with your foot until the cutter reaches the set distance and stops automatically.
中文版 
English1
